Paperclip settings
The RCT-Rx65 can be reprogrammed simply by connecting two output pads together and then switching on the receiver. The following features can be changed in this way.
  1. Perform a 'Hard reset' (factory reset) (Pads 1 and 2)
  2. Change motor control between 'low off' and 'center off' (Pads 2 and 3) 
  3. Enable/disable LVC (eg: when using Nicads, NiHMs or LiFe cells) (Pads 3 and 4)
  4. Enable/disable Selecta (Pads 1 and 3)
  5. Enable/disable Cruise Control/Failsafe (Pads 1 and 4)
For more information see the manual for the RCT-Rx65